How To Remove A Diving Board Base?

To remove a diving board, follow these steps:

1. Remove the bolts holding the diving board in place.

2. Disconnect the diving board.

3. Set the base and board on a stable surface.

4. Take pictures of the bolts and make a drawing with dimensions.

5. Send this to SR Smith for assistance.

To remove a diving board base from concrete, first unscrew the bolts that hold the board in place. Use a chisel and hammer to break the sealant around the nuts. If necessary, use a cut-off wheel on a grinder to cut through the nut bolt as low as possible.

If you’re removing a diving board from a concrete deck, there are four bolts set in the concrete with nuts approximately 1 inch in diameter that hold the base of the diving board. You can try using a 12 pipe wrench and hitting it with a hammer, but they don’t budge.

For safety purposes, remove the diving board after its last dive. However, the electrical box for the pool light is in the bottom of the board. To hide the electrical while still having everything, consider hiding the electrical box and using a 12 pipe wrench and a hammer.

In summary, removing a diving board can be a simple and safe process with proper guidance and tools.