How Much Is A Cedar Strip Canoe Worth?

Pre-built cedar strip canoes start at 2,000, while cedar canvas canoes start at 3,000. Many are handmade by skilled craftspeople, and wooden canoe kits cost a little less. The total cost of building a cedar strip canoe includes materials, tools, labor costs, and the cost of red cedar strips.

The Cedarstrip Canoe is a 30-minute short film produced by Jason Eke, which provides an overview of the process and rewards of building a cedar strip canoe. Fully restored wood-canvas canoes are listed in classified ads in a range from 3,500 to 7,000. Brand-new old canoes can be found on eBay for around 1,200 to 1,500.

Created wood-canvas canoes can be found on eBay for around 1,200 to 1,500. The WCHA has a classified section for strip canoes, but I have not seen any strippers there. Some popular cedar strip canoes include the Solo Canoe, Kayak-Canoe, All-Wood, and 10′ Whisper.

Custom-built canoes, such as the Solo Canoe, Kayak-Canoe, All-Wood, and 10′ Whisper, are available for purchase on Minneapolis Craigslist. Although some canoes have high prices, they are generally less valuable than cheap department store canoes.

In summary, building a cedar strip canoe requires few tools, but it is worth the effort and cost to create a well-made and durable boat.

How long does a wooden canoe last?

Well Maintained Wooden Boats Can Last 10 – 25 Years.

There is something special about wooden boats. They have a certain charm and allure that is hard to replicate. Many people are drawn to them because of their classic look and feel. But there is more to wooden boats than just their aesthetics. People also appreciate the fact that they can last for many years with proper care and maintenance. In this blog post, we will explore how long wooden boats last and what you can do to make sure yours lasts as long as possible!

Well Maintained Wooden Boats Can Last 10 – 25 Years. For anyone who loves being on the water, a wooden boat can be a beautiful and classic choice. While wooden boats require more upkeep than their fiberglass or aluminum counterparts, with proper care they can last for many years. In fact, well-maintained wooden boats can last 10 to 25 years or even longer.

With regular cleaning, sanding, and painting, wooden boats can continue to look great and perform well year after year. In addition, it is important to check the boat’s hull regularly for any signs of cracks or other damage. By taking good care of a wooden boat, it is possible to enjoy many years of use.

How do you maintain a cedar strip canoe?

The ultra-violet rays of the sunlight tear apart wood finished almost as fast as a belt sander and what the sun doesn’t ruin, the moisture soon will. Therefore, it is imperative to refinish the exposed woodwork on your canoe (a light sanding and a coat of varnish) at least every two years.

If thecanoe has to be stored outside use a good weatherproof tarp and make sure it isoff the ground and out of the sun.

Eventhough we use a good oil base exterior enamel, a canoe should not be left inthe water for extended periods of time when not in use. If you have cane seats, varnish the topsurface only. The material has tobreathe.

If yourcanoe overturns – dry it out. Cedarreadily absorbs water – not drying it could cause the planking to warp. The secret is attention to details thataren’t immediately obvious. That’s whyit is so easy to miss them. The forcesyou’re fighting are sunlight and rain – they’re sneaky and persistent..

How do you store a cedar strip canoe?

Store upside down and inside if possible. If the canoe has to be stored outside use a good weatherproof tarp and make sure it is off the ground and out of the sun. Even though we use a good oil base exterior enamel, a canoe should not be left in the water for extended periods of time when not in use.

If thecanoe has to be stored outside use a good weatherproof tarp and make sure it isoff the ground and out of the sun.

Eventhough we use a good oil base exterior enamel, a canoe should not be left inthe water for extended periods of time when not in use. If you have cane seats, varnish the topsurface only. The material has tobreathe.

If yourcanoe overturns – dry it out. Cedarreadily absorbs water – not drying it could cause the planking to warp. The secret is attention to details thataren’t immediately obvious. That’s whyit is so easy to miss them. The forcesyou’re fighting are sunlight and rain – they’re sneaky and persistent..

Is canoe more difficult than kayak?

If you’re a new paddler, the short answer is: yes, canoeing is harder than kayaking.

In no way does that mean you shouldn’t give canoeing a try, though…and learn to kayak, too! But if you must choose between the two, most beginners find kayaking easier to learn.

Becoming a proficient canoeist takes practice (Photo courtesy of Five2Nine)

(NOTE: While I’m by no means an elite paddler of either canoes or kayaks, I’ve been paddling canoes actively since 1987 and kayaks since 2007. My husband and I have raised three kids who are now adults, and we taught them all how to paddle. And I bring a lot of friends with me canoeing and kayaking, many of whom have never paddled before. So I’m basing my assessment on life experience and observation.)

How much is my canoe worth?

East says a brand new canoe costing $3,500 could decrease in value about $1,000 during the first few years. If a canoe isn’t damaged, the value can remain around $2,000 to $2,500 for the next five to six years, and after 15 to 20 years can have a forever price of $700 to $1,000 if it is still in decent shape.

Maybe you want to buy a used canoe instead of a new one because you are on a budget. Or perhaps you think you won’t use your canoe enough to warrant a brand new one, or you just aren’t sure what to buy.

Whatever your reason, when buying a used canoe you must understand that not all canoes are created equal. Much like buying a used car, you need to figure out where to search, what model to buy, and what to specifically look for and avoid. Read on to find out what to look for when buying a used canoe.

Get to know the brands. Before you take a look at the used market, it’s a good idea to familiarize yourself with the common canoe brands you’re likely to come across. Click the links below to view the canoe models offered by each brand in our Paddling Buyer’s Guide. This is also a great resource when you find a used boat—you can read up on its specs, find out what it sells for new and discover what others think of it via reviews.

How many cedar strips do I need for a canoe?

Strips. For a strip-built kayak a good rule of thumb is 2 board feet of western red cedar or other softwood for each foot of boat length. A board foot is a volume of wood 12″ long x 12″ wide by a nominal 1″ thickness. Most wood you will buy is planed down to 3/4″ thick or even 11/16″ for some cedar and redwood.

To get a little bit more specific it takes just under 18 strips to cover a 12 inch wide area. In other words to completely cover one square foot of surface area on a boat you will need 18 linear feet of strips. If you are looking at a design with a surface area of 50 square feet you will need approximately 900 linear feet of strips. This does not leave much room for errors so you will want to include some extra.

Use our Online Strip Calculator. You can typically get three 1/4″ thick strips out of each inch of board width for a yield of 36 linear feet of strips per board foot. This works out to 1/2 a board foot of lumber per square foot of boat surface area. So for 50 square feet of surface area you would need a minimum of 25 board feet of lumber.

Notice that the surface area of a boat varies widely for boats of the same length; the Petrel has a surface area of 46 sq ft and the Great Auk is 59 sq ft. The rule of thumb would suggest 34 board feet where the Petrel only needs 23, but the Great Auk needs almost 30, so the rule generally over estimates, but you will probably happier to have too much wood instead of too little. Don’t try to get exactly the right amount forcing you to use tiny scraps to finish covering the boat.

How thick is the wood on a cedar strip canoe?

Strip Thickness It’s possible to reduce final weight of your canoe or kayak by using strips as thin as 3/16″. While suitable kayaks or canoes with narrower beam, we don’t recommend strips this thin for boats with a beam over 30 inches or with a shallow-arch midships profile. Standard strip thickness is 1/4 inch.

Canoe Weight Calculater. In order to achieve an accurate result please ensure that all fields are filled out. If something seems odd in the final total, check your entries. Sub weights and total weights are calculated as entries are made. Enjoy!

Using the Calculator. This calculator is designed to help canoe builders to determine the final weight of their canoe. It allows the user to make decisions about what canoe design to choose, which materials to use, and how much weight certain elements add to or subtract from the total.

Our objective is provide a useful and accurate tool. That said, keep in mind that we can’t control the accuracy of what you do in your shop or the qualities and weights of the materials you purchase.

What is the best finish for a cedar strip canoe?

The only varnish that I would avoid is Schooner Varnish. There have been occasional problems reported over a couple of decades with Schooner not hardening-up properly over WEST. It doesn’t happen every time, but there does seem to be enough evidence of problems to be cautious. I generally use Captain’s Varnish over WEST epoxy. It is high quality stuff with a good UV absorber and I’ve used it for a long time with excellent results. I usually apply it to hulls in thin layers using a yellow Gougeon roller, followed by tipping it out immediately with a soft brush. I seem to get much better thickness control and far fewer drips or sags that way than I do with a brush.

If you’d asked about System 3 epoxies, I’d tell you to go buy their spar urethane – That and Interlux spar varnish are the only things I’ve found that cures over this particular epoxy. Has anyone else found something that works with System 3?

How much should a canoe cost?

Canoes can range in price from a few hundred dollars to several thousand dollars. It’s important to do your research and find the best canoe for your needs. You don’t want to spend too much or too little on a canoe, but rather find one that is the perfect fit for you.

A Canoe can be bought for a very affordable price. Canoes vary widely in size and purpose depending upon where you live and who builds them. You might find a canoe made entirely by hand using local materials that costs as little as $500-$1,000. Alternatively, a professionally built fiberglass sea kayak manufactured offshore could retail for tens of thousands of dollars.

Canoes vary significantly in cost according to design, the material used, and the construction technique employed. Some manufactured vessels, like kayaks, can cost well over 10K per unit. Others, like row boats, sell for around 1K — 3K.

A canoe is an inexpensive boat that lets you enjoy some simple pleasures while enjoying nature away from pollution, crowds, and traffic noise. Canoes offer you the opportunity to relax while having fun in different environments in lakes, rivers, creeks, bays, and oceans. You need to buy only two basic necessities — the kayak itself and other equipment required to paddle a canoe.

How much does a cedar strip canoe weigh?

The weight of a cedar strip canoe will depend partly on its length. A 2-seater like the one in this video will be about 60 pounds, while a solo canoe will be closer to 45 pounds. Not as light as some of the composite canoes perhaps, but cedar strips are still very manageable on a wilderness trip over the portages you’ll face.

Some would say their beauty more than makes up for any small weight difference!

A cedar strip canoe has a couple benefits over synthetic canoes:

Are cedar strip canoes any good?

Although water soaking into the wood can make some wooden canoes heavy over the years, cedar canoes have a better overall track record when it comes to that. You’ll find that they can withstand the test of time better than other wooden canoes, and they won’t really disappoint even when they start to deteriorate.

How do I identify my canoe?

Newer canoes and kayaks often have a sticker placed next to the HIN that gives the vessel’s serial number. The HIN: Is a 12-digit serial number that uniquely identifies a vessel. Is usually stamped or embossed on the starboard side at the stern of the hull.