This video tutorial demonstrates how to replace and waterproof kayak rigging pad eyes and rivets using a 316 drill bit. The video covers four methods of removing rivets without expensive tools, including drilling, punching, and hammering. A rivet removal tool is essential for removing rivets quickly and efficiently. For smaller rivets, use a drill bit to drive through the surface, while for stubborn rivets, drill out the center with a matching drill bit.
Blind rivets can be used to install almost anything on the backside of the mount. Center the bit on the stem in the rivet and the bit will drill the head off the rivet leaving the stem. It is usually possible to push the remainder of the rivet out.
To remove rivets, use a small screwdriver or something smaller than the rivet shank and push it out of the hole. The best bet is to take an 18-inch drill bit and drill through the head, which will pop off and the body of the rivet will fall inside. Drill a hole just big enough to squeeze in the rubber shaft, affix whatever the rivet held, and use a bigger drill bit like 316 or 14 to drill until the top comes off or deep enough that any roll or burr on the top of the rivet comes off.
📹 ✅How To Remove Rivets from Metal, Wood, or Plastic? | 🛠 Rivet Removal from a Fishing Kayak Review
Http://amzn.to/2oi4xRR, This is a quick video on how to remove a rivet from a kayak by drilling through the rivet with a 3/16 drill bit.
📹 How to remove replace and waterproof Kayak rigging rivets
Tutorial on how to replace and waterproof kayak rigging pad eyes and rivets.
Add comment