How Do You Clean A Diving Board?

Power washing a diving board requires a pressure washer with a pressure of at least 1,500 psi and a detergent designed for pressure washers. Hold the pressure washer nozzle about 2 feet from the diving board and use a back and forth motion. To refinish a diving board, sand it with medium-grit sandpaper to remove dirt, grime, or old paint. Fill a bucket with warm water, add mild detergent, and dip a soft brush in the water.

To preserve the appearance and durability of your diving board and stand surfaces, follow these regular maintenance procedures, especially immediately after high use periods. Paint a diving board effectively by thoroughly cleaning the board to remove dirt, grime, and any old paint. Sand the surface lightly to create a rough texture that helps the new paint adhere better. Remove old grease from the slide track with WD-40, spraying only on the rag, careful not to overspray onto tiled surfaces or the diving board to prevent a slippery situation. Wipe the entire slide track clean of all grease.

Repaint the top of the board using white fiberglas gelcoat and having the proper sized tread grit. Catalyze the gelcoat, carefully roll it on, and then salt. Maintenance methods include hose off the board with fresh water daily, scrub with detergent or chlorine, hot water soft bristle brush, and muriatic acid to remove algae or stains. Spray outdoor moss and mildew remover in a small patch and let it work for 10 minutes before rinsing off with clear, warm water.

Maintenance time is daily: hose off the board with fresh water daily, monthly: scrub with any type of soft bristle scrub brush and warm water. For a more thorough cleaning, sprinkle baking soda first into the toilet and then pour vinegar into the bowl. Use a bleachwater mix of 20-25% bleach along with a nylon bristle brush followed by a plain water rinse from a garden hose.